|
Intelligent, Autonomous Mobile Robots and Robot Kits for
Education, Hobby, Entertainment, Commercial 
|
316 NW 17th Street, Suite A, Gainesville, FL 32603
Click here for ordering
information & prices.
|
Microcontrollers and Circuit
Boards
|
MindStamp
Microcontroller Prototyping System
This microcontroller prototyping system allows you to
develop microcontroller hardware and software for processors in the
Motorola 68HC11 family. This system is useful for development of control
software for motors, sensors, instruments, robots, games, electronic
products, experiments, appliances, and other embedded applications. Click here for more information on this new
development system.
|
|
|
|
MSCC11
Microcontroller
Pick any Motorola MC68HC11 series microprocessor and
plug it into the MSCC11. The MC68HC11
processor is mounted in a 52-pin PLCC with headers connected to the
processor ports. The MSCC11 realizes a
single chip microcontroller and provides many advanced features.
Click here for more information.
|
|
MTJPRO11
Microcontroller
The Mekatronix MTJPRO11
has many of the features of the ME11 combined with the Motorola EVBU, plus
extras. This board has a broad range of applications. Any project requiring
a small, embedded microcontoller will find the MTJPRO and ideal solution.
Size: 2.5 inches by 2.5 inches.
Click here for
more information.
|
|
|
|
MEKAVR128
Microcontroller
The
MEKAVR128™ microcontroller expands the 8-channel analog port to 29 analog
input channels, controls up to 16 servos and provides up to 23 digital IO
ports. This photograph illustrates the board fully populated with male headers. The core micro on this board is the
Atmel Mega 128 with 128K of Flash memory and 2K of SRAM.
Click here for more information.
|
|
MRSX01 Sensor
Expansion Board
The MRSX01 mates
with the MRC11 to provide extensive
sensor and control capabilities for robotic and other mechatronic projects.
The two board stack, MRSX01 and MRC11, furnishes the circuitry that
supports all the sensory, motor, and cognitive functions for the TALRIKIITM
autonomous mobile robot.
Click here for more
information.
|
|
|
|
ME11 EVBU
Daughter Board
The Mekatronix Expansion Board (ME11) mates with the Motorola MC68HC11 EVBU
board to form a complete, control oriented microcomputer system. It
provides 32 kbytes of expanded memory and hardware to generate 40kHz
signals for IR and sonar sensors.
Click here for more information.
|
|
MB2325 Serial
Communications Board
The MB2325 module
permits the user to physically connect an RS-232C serial communications
cable restricted to receive (Rx), transmit (Tx), and DTR(DSR) protocol, to
a six wire, 5 volt serial communications cable.
Applications include serial communications between a personal computer COM
port via an MB2325 to any Mekatronix
device, such as the MSCC11, that
provides serial communication at logic voltage levels (+5 volts and
ground).
Click here for more
information.
|
|
Refer questions, comments, or errors regarding this website to the webmaster@mekatronix.com
All other questions should be referred to Tech
Support
Copyright
©1995-2000 Mekatronix, Inc. All
rights reserved.
|